Setting Procedure; General Information; Care Recommendations; International Warranty - Baume & Mercier Baume 10603 Mode D'emploi

QUARTZ – HOUR, MINUTE, SMALL SECONDS, DATE

SETTING PROCEDURE

1. Pull the crown to Position 3.
Setting the time
2. Turn the crown to advance the hands (A, B) clockwise and position them at the desired time.
Note: When the hands (A) pass the 12, if the date changes, it means it is midnight and if the date does not
change, it means it is noon.
3. When the start of the set time is announced (reference clock, radio, etc.), reset the crown to Position 1.
1. Pull the crown to Position 2.
Rapid date change
2. Turn the crown to advance the date (E) chronologically, until the desired date appears.
3. Reset the crown to Position 1.
For months with less than 31 days, the date must be changed manually at the end of the month.

GENERAL INFORMATION

Your Baume & Mercier watch was both designed and manufactured with great care. Please read our

Care recommendations

recommendations for use and care on www.baume-et-mercier.com.
Your Baume & Mercier watch is covered by the Baume & Mercier International Warranty.

International warranty

The conditions of the Baume & Mercier International Warranty are available on www.baume-et-
mercier.com/customer-service/warranty.html.
Setting procedure – Quartz, hour, minute, small seconds, date
A : Hours hand
B : Minutes hand
C : Seconds hand
E : Date
4