Making An Espresso - Lelit Grace Mode D'emploi

VIP Line - Grace - PL81T · Victoria - PL91T
Hot water
D.4 Place a jug under the steam/hot water wand (13).
D.5 Press the hot water switch (5). The pump starts and the water icon appears on the
display (12), accompanied by the indication to rotate the steam/hot water knob (11).
D.6 Turn the steam/hot water knob (11) counterclockwise.
14
D.7 As soon as water comes out of the wand (13), rotate the knob (11) clockwise
to close it and press the switch (5) again to stop the function.
Steam
D.8 Point the steam/hot water wand (13) onto the cup-holding grate (7).
D.9 Press the steam switch (4). The LCC display (12) will flash, showing the water
temperature in the boiler. Wait until the bar is complete, so that the machine
reaches the operating temperature for steam dispensing.
D.10 When the desired temperature has been reached, the bar will disappear
and the steam icon will appear, accompanied by an indication to turn the steam/
hot water knob (11). The machine is now ready for use.
D.11 Turn the steam/hot water knob (11) counterclockwise.
D.12 When steam comes out from the nozzle, turn the knob (11) clockwise to
close it and press the steam dispensing switch (4) again to return the machine
to its function of dispensing coffee and hot water.
to start

Making an Espresso

Thanks to the pre-set function settings, the machine is immediately ready to
dispense espresso. To change the settings, please refer to "Adjusting the LCC
settings" section.
Note.
organoleptic qualities, the flavour and aroma of an Espresso.
E
Preparing the machine for making coffee
E.1 Turn on the espresso machine by pressing the main on/off switch (2). The
display (12) will show the Lelit logo, the three switches and the gauge will go
on for a short time.
E.2 Insert the filter holder (e) without coffee firmly into the coffee distribution group
(6), so as to align the handle with the padlock symbol on it.
The machine comes with a cup warmer (9). Using warm cups enhances the