Campbell Hausfeld PW320200 Instructions D'utilisation page 9

GETTING TO KNOW YOUR UNIT
NOTE: Photographs and line drawings used in this manual are for reference only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
Engine: Drives the high
pressure pump. Refer
to the Engine Owner's
Manual for location
and operation of engine
controls.
Pump Inlet
Figure 1 - PW320200
NOT SHOWN:
Detergent Siphon Hose: Feeds cleaning agents into the pump to mix with the water. See How To Apply Chemicals/Cleaning Solvents
instructions in Operation section.
High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand.
Spray Gun: Connects with spray wand to control water flow rate, direction and pressure.
Spray Wand: See How To Use Spray Wand instructions in Operation section.
BASIC ELEMENTS OF AN ENGINE
Refer to the Engine Owner's Manual for location and operation of engine controls.
Choke Control: Opens and closes carburetor choke valve.
Starter Grip: Pulling starter grip operates recoil starter to crank engine.
Engine Switch: Enables and disables ignition system.
High Pressure Pump: Increases the
pressure of the water supply.
Pump Outlet
7
Handle
Frame
Quick Connect Nozzles