•
When a screw is tightened, make the screw
at a right angle to the surface. After tighten-
ing the screws or bolts, perform checks to
ensure that the tightening is sufficient
enough so that there is no movement or
looseness.
Make sure to remove this product if it will
no longer be used.
Places of installation
There are various ways of installing the camera as shown below.
● When using a two-gang junction box
● When installing on a wall with high
strength
Wall
Two-gang junction box
(manufactured by Panasonic)
Cable running
Cable running
● When installing on concrete wall
Cable running
Concrete slab
Cable running
5