Preparing The Dishwasher Enclosure; Product Dimensions; Enclosure Dimensions - Samsung DMT800 Serie Manuel D'installation

preparing the dishwasher
enclosure

PRODUCT DIMENSIONS

Side view
(DMT800 series/
DMT610 series/
DMT400 series/
DW80F800 series/
DW80F600 series)
Side view
(DMT350 series /
DW7933 series)

ENCLOSURE DIMENSIONS

This dishwasher is designed to be enclosed
on the top and on both sides by a standard
residential kitchen cabinet unit.
The installation enclosure must be clean and free
of any obstructions.
The enclosure must be at least 24 inches wide,
24 inches deep, and 34 1/8 inches high.
For the front door of the dishwasher to be fl ush
with the leading edge of the counter top, the
counter top must be at least 25 inches deep.
installation_DD68-00046A-06_EN_130401.indd Sec5:5 installation_DD68-00046A-06_EN_130401.indd Sec5:5
27" (686 mm)
20 ½ " (520 mm)
24 ²⁄ 3 " (627mm)
20 ½ " (520 mm)
24 ²⁄ 3 " (627mm)
Rear view
7
23 ⁄ " (605 mm)
8
The water supply
line, power cable
and drain hose
should go through
this space behind
the dishwasher.
Then, they run in
channels under
the dishwasher to
2 1⁄ 3 " (60mm)
connections in the
front.
24" (610 mm)
minimum
24" (610 mm)
minimum

preparing the dishwasher enclosure _5

2013-04-01 2013-04-01 5:05:21 5:05:21