Basic Operation; Tone Control - Teac SX Mode D'emploi

Basic Operation

3
1
2
1 Press the STANDBY/ON switch to
turn the unit on.
< The unit turns on with the source that
was last selected.
< You can also use the CD, TUNER or AUX
button to turn the unit on.
2 Press the CD, TUNER or AUX button
to select a source.
The button of the selected source will
light.
< To listen to an external source connected
to the AUX IN jack, press the AUX
button.
16
3 Play the source, and adjust the
volume using the VOLUME rotary
knob.
The volume is adjustable from MIN (00)
to MAX (40). You can hold down the
VOLUME – or + buttons of the remote
control unit to reduce or bring up the
volume continuously.

Tone Control

1. Press the BASS or TREBLE button.
To adjust the level of low frequency
sound range, press the bass button.
To adjust the level of high frequency
sound range, press the treble button.
2. Within 5 seconds, press the VOLUME
buttons to change the setting.
The level can be adjusted from –5 to +5.
Dimmer
You can dim the front panel's display by
pressing the DIMMER button.
< This function will be cancelled when the
STANDBY/ON switch is pressed.
< When you set the sleep timer, the display
is dimmed automatically.
Muting
To mute the sound temporarily, press the
MUTING button. Press the MUTING
button again to restore the sound.
< While muting is engaged, "MUTING"
blinks on the display.
< If you change the volume during the
muting, the muting will be canceled.
Headphones
Insert the headphones plug into the
PHONES jack, and adjust the volume.
CAUTION
Always lower the volume level prior to
plugging in your headphones. TO AVOID
DAMAGING YOUR HEARING - Do not
place your headphones on your head
until after you have plugged them in.
17