Avdel Genesis nG2 Manuel D'instructions page 11

N o s e A s s e m b l i e s
N o s e T i p s
To fit Nose Tips Type 2/3 or Nose Extension, the 'T' Adaptor 41 must be replaced with Jaw Spreader Housing 9*.
•
Loosen Locknut 40 using 16mm AF Spanner.
•
Unscrew and remove 'T' Adaptor 41 together with 'O' Ring 12.
42
•
Fit Jaw Spreader Housing 9* (71210-02101) together with 'O' Ring 10* or 11* (Jaw Spreader Housing 9* and 'O' Ring 10* or
11* are supplied with Type 2 and 3 Nose Assemblies)
•
The Jaw Spreader Housing 9* must be tightened onto Piston 36 trapping Vacuum Tube 42 finally tighten
Locknut 40 against Jaw Spreader Housing 9*.
42
Items 9* and 10* or 11* refer to illustrations on pages 9, 10 and 12.
For other items refer to the general assembly drawing and parts list on pages 26 and 27.
41 12
40
36
9* 10* or 11*
36
E n g l i s h
11