Mode Auto - Cameo ZENIT P100 DTW Manuel D'utilisation

SETTING STAND ALONE MODE (Stand Alone)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the "Stand Alone" menu option (note
arrow) and confirm with ENTER. In the submenu, you can now select between the standalone modes "Auto" and "Static" by using UP and
DOWN. Confirm your selection with ENTER.
---------- Menu ---------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Information
STAND-ALONE AUTO MODE (Auto)
In Auto mode, the permanent sequence of "Light on" and "Light off" is pre-programmed. Here you can program the brightness for the "Light
on" command (Dimmer), the step duration (Step), and the fade time (Fade). Now select Auto mode and confirm with ENTER, as described
under "SETTING STAND ALONE MODE". To set the brightness, select the "Dimmer" menu option using UP and DOWN, confirm with ENTER,
and select the desired value from 000 to 100 using the UP and DOWN keys. Confirm with ENTER. The values for step duration and fade time
can be set in the same way. Confirm all value changes with ENTER.
------ Stand Alone ------
Auto
Static
STAND ALONE STATIC MODE (Static)
As with a DMX control device, static mode makes it possible to directly set values from 000 to 255 on the device for dimmer, strobe, warm
white and amber. This allows the user to create individual scenes without needing an additional DMX controller. Now select Static mode
and confirm with ENTER, as described under "SETTING STAND ALONE MODE". Now select the menu option you would like to change using
the UP and DOWN keys (note arrow) and confirm with ENTER. A three-digit number field will now appear on the display, and you can set
the value as desired from 000 to 255 using the UP and DOWN keys. Confirm each value change with ENTER. The values for configuring the
strobe function correspond to the values of the multi-functional strobe in the 4-channel DMX tables.
------ Stand Alone ------
Auto
Static
8
------ Stand Alone ------
Auto
Static
------ Stand Alone ------
Auto
Static
----------- Auto -----------
Dimmer
Step
Fade
---------- Static ----------
Dimmer <255>
Strobe <255>
<255>
WarmWhite
Amber <255>
Mode
Auto
Mode
Static