Operation; Pushing Bracket - Prophete 2928 Notice D'utilisation

ASSEMBLY OF PUSHING BRACKET
1. Insert the jogger wheel into the
wheel holder and tighten it with the
quick clamp. Push the wheel boom
into the holder at the frame and tigh-
ten it with the attachment screw.

OPERATION

You must comply with the safety instructions of these operating instructions before using
the trailer!
CONNECT THE COUPLING
1. Before starting your ride, connect the
coupling part of the tow bar to that of
the bike and secure it with the safety
pin.
2. Guide the safety belt around the strut
of the rear wheel and attach it to the
safety eyelet of the towbar.
ASSEMBLY • OPERATION
27