Battery Installation; Operating Instructions - HeartCare LOX100A Manuel De L'utilisateur

Symbol
Battery orientation
CE marking
Reference instructions for use
IP22 Moisture rating
Serial number
Manufacturer information
Date of manufacture
European Authorized Representative
Please comply with local authority
regulations when disposing this device
Storage temperature
Storage humidity
Storage atmospheric pressure
Not for continuous monitoring
(no alarm for Spo2)
Pulse intensity bargraph
5
Description
6．Battery Installation
1. Open the battery cover according to the direction of arrows as shown in
Fig 4.
2. Place 2*AAA batteries into the battery compartment, and ensure correct
positioning as shown in Fig 4.
3. Close the battery cover.
Press down
from here
to push the
battery cover
open easily
Figure 4
Note:
The device is at risk of damage if the batteries are installed incorrectly. For
long periods of none use, always remove the batteries
7．Operating Instructions
1. Install batteries in accordance with item 6. Battery installation.
2. Open the oximeter as shown in Fig 5.
3. Fully insert finger as shown in Fig 6.
4. Press the power button to switch on the oximeter.
5. Ensure minimum movement of finger and body during measurement.
6. Read measurement from the device screen.
7. The LOX100 has 4 different user screen options. Once the screen
measurement is stable, pressing the power button will change the screen
display as shown in Fig 7.
6