Safety Instructions; General Power Tool Safety Warnings - VONROC CS501DC Traduction De La Notice Originale

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Keep bystanders, especially children and
pets, at a distance greater than 10m.
Wear eye protection.
Wear ear protection.
Wear a dust mask protection.
Take note of the dimensions of
Ømax.
the saw blade. The hole
150mm
diameter must fit the tool
Ø16mm
spindle without play. If it is
necessary to use reducers,
ensure that the dimensions of
the reducer are suitable for
the base blade thickness and
the saw blade hole diameter,
as well as the tool spindle
diameter. Wherever possible,
use the reducers provided
with the saw blade. The saw
blade diameter must match
the information specified on
the symbol.
Danger Area! Keep hands far away (10cm)
from the cutting area while the machine is
running. Danger of injury when coming in
contact with the saw blade.
Warning of laser radiation.
WWW.VONROC.COM
Time-lag miniature fuse-link.
Max temperature 45°C.
Do not throw the battery into fire.
Do not throw the battery into water.
Separate collection for Li-ion battery.
The product is in accordance with the
applicable safety standards in the European
directives.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or batte-
ry-operated (cordless) power tool.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos­
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while ope­
rating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi­
tions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
EN
5