Gigaset Repeater HX Mode D'emploi page 19

Problem
No reception of the handset
in the area of the repeater
Right LED lit constantly
No registration of addi-
tional repeaters possible
with encryption activated
Care
Wipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibre
cloths.
Never use a dry cloth; this can cause static.
In rare cases, contact with chemical substances can cause changes to the device's exterior. Due
to the wide variety of chemical products available on the market, it was not possible to test all
substances.
Impairments in high-gloss finishes can be carefully removed using display polishes for mobile
phones.
Cause
Repeater not registered
No radio connection to
the base station
Handset cannot find the
repeater
Base station has not been
prepared for repeater
operation
Maximum number of
repeaters that can be con-
nected to the base station
has been reached
Action
Repeat registration
Select a new location
Switch handset on and off
Check the preconditions and prepar-
atory steps required by your base sta-
tion for registering a repeater. Then
repeat these steps to register the
repeater.
De-register repeaters that are no
longer required using the repeater
de-registration procedure described
in the user guide or system menu of
your phone.
If you need more repeaters to relay
the base station, please note that you
can run up to 6 repeaters, if encryp-
tion is deactivated.
To deactivate encryption, all regis-
tered repeaters must first be de-regis-
tered. You can then deactivate
encryption and register your repeat-
ers again.
Miscellaneous
17