GE Zoneline AZ95E Mode D'emploi page 27

Setting the auxiliary control
Mode 7 Fan Boost Mode
restrictive ductwork where additional airflow is needed.
speed to ensure proper circulation.
Press MODE until a 7 appears in the first digit of the
display. Press the - pad for OFF
for ON
display. Press AUX SET to lock in your selection and
AUX SET mode.
Mode 8 All-Electric Heat (AZ95H only)
operation is locked out, causing the unit to provide only
electric resistance heat.
All-Electric Heat option, press MODE until an 8
appears in the first digit of the display. Press the - pad
for OFF + pad for ON
the second digit of the display.
Mode 9 Heat Boost (AZ95H only)
When Heat Boost is ON, supplementary electric heat
is added to the heat pump operation to help maintain a
consistent, comfortable room temperature.
the first digit of the display. Press the - pad for OFF
+ pad for ON
digit of the display. Press AUX SET to lock in your
AUX SET mode.
Mode P Engineering Revision Setup
circuit board is replaced.
is installed, the unit will automatically enter this mode.
P1. Press the + pad until the number
engineering revision is the last number in the model
number. Press Aux
first power cycle using AUX SET. Press MODE until P
appears in the first digit, and follow the steps described
above.
49-5000561 Rev. 1
+ pad
OFF.
AZ95H
," heat pump
OFF.
MODE until a 9 appears in
OFF.
Fan Boost
Mode OFF
All-
Electric
Heat OFF
Heat Boost OFF
AZ95E09DACK2
Fan Boost
Mode ON
All-
Electric
Heat ON
Heat Boost ON
Engineering Revision
27