Preparation Using Coffee Beans - Siemens CT636LE Série Mode D'emploi

en
The following settings are possible:
Coffee strength
Y
Very mild
YY Mild
YYY
Regular
YYYY Strong
YYYYY
Very strong
XY aromaDouble Shot strong
XYY
aromaDouble Shot strong+
XYYY aromaDouble Shot strong++
aromaDouble Shot
F
The longer the coffee is brewed,
the more bitter substances and
undesired aromas are released�
This has a negative effect on the
taste and makes the coffee less
easily digestible� So for extra strong
coffee, the appliance has a special
aromaDouble Shot function� When
half the quantity has been prepared,
it grinds and brews fresh coffee
beans so that only the pleasant,
aromatic scents are released�
F The aromaDouble Shot function is
not available for ristretto, espresso
macchiato, and when ground coffee
is used�
Drink temperature
Values for coffee drinks:
normal
O
high
P
very high
Q
Values for hot water:
70° C White tea
80° C Green tea
90° C Black tea
Max Fruit tea
42
Volume
The volume differs depending on
S
the type of drink and can be set in
ml steps�
The volume dispensed can fluctuate
F
depending on the quality of the milk�
If no controls are activated for
F
approx� 30 seconds, the appliance
will automatically exit the settings
mode� The settings made will be
automatically stored�
Preparation using
coffee beans
The appliance must be ready for use�
● Place a cup underneath the beverage
outlet�
● Use the rotary selector to select
"Ristretto", "Espresso" or "Coffee"�
The display shows the selected drink along
with the preset values for the strength of the
coffee and the amount for this drink�
Y Y Y Y
F The settings can be changed
as described in the section
"Drink adjustment"�
● Press C to start dispensing�
The coffee is brewed and then dispensed
into the cup�
Press button C again to stop
dispensing prematurely�
Coffee 160 ml
Adjust