Important Safety Instructions For All Battery Packs - DeWalt DCBL590 Guide D'utilisation

on the switch or energizing appliance that have the switch on
invites accidents.
b) Disconnect the battery pack from the appliance before
making any adjustments, changing accessories, or storing
appliance. Such preventive safety measures reduce the risk of
starting the appliance accidentally.
c) Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create a
risk of fire when used with another battery pack.
d) Use appliances only with specifically designated battery
packs. Use of any other battery packs may create a risk of injury
and fire.
e) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
f) Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
g) Do not use a battery pack or appliance that is damaged or
modified. Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
h) Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature above
130°C may cause explosion. The temperature of 130°C can be
replaced by the temperature of 265°F.
i) Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the safety
of the product is maintained.
SAVE THESE INSTRUCTIONS
WARNING:
Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
or DC ..direct current
................ Class I
Construction
(grounded)
................ Class II
Construction
(double insulated)
RPM ............ revolutions per
minute
A ..................amperes
W .................watts
or AC ...... alternating
current
Important Safety Instructions for All Battery
Packs
When ordering replacement battery packs, be sure to include the
catalog number and voltage. Consult the chart at the end of this
manual for compatibility of chargers and battery packs.
3
ALWAYS USE SAFETY GLASSES.
n o ................ no load speed
.../min .........per minute
................earthing terminal
................. safety alert
symbol
............... Read instruction
manual before use
................ Use proper eye
protection
................ Use proper
hearing protection
................ Use proper
respiratory
protection