Filter Replacement - IQAir Atem Mode D'emploi

Small blue light and
sound = low speed
Full blue light and sound
= high speed
(Cooling Mode)

Filter Replacement

The Atem will indicate a necessary filter change with
a double red flash accompanied by a sound.
HyperHEPA filter
Follow steps 1-4 to change the filter in the Atem.
Disconnect the Atem from the power source
before changing the filter!
Step 1: Remove the air purifier from the stand and
place it face down on a cloth surface with the back
facing up.
Opening direction
Lift the back cover away
Product Use and Operation
Medium blue light
and sound = medium
speed
A double red flash with
sound = change filter
To unlock, turn the locking ring
counter clockwise
Step 2: On the back
cover, note the direction
indicators on the locking
ring. Grasp the locking
ring firmly and rotate
in a counter-clockwise
direction until the back
cover (3) releases. You
should be able to easily
lift the back away.
EN
8