Keep It Updated - Worx landroid l1000 Manuel Du Propriétaire

B. Fully charge the battery
C. Turn the power off
1. Getting back to work in the Spring
When it is time to re-start Landroid for the new season, please perform the following checks:
A. Update the time and date settings via the app
B. If you notice signs of oxidation on the charging contacts of Landroid and the charging station, clean these with a fine grade emery cloth
C. Full charge Landroid's battery before operating

Keep it updated

Landroid is always improving and new software versions are made available for free. Always keep Landroid software updated to
makethe most of your machine.
1. Over-the-Air (OTA) updates
If your Landroid is connected to your Wi-Fi network, you will be notified that new software is available via the app. Once you confirm,
the update will happen automatically Over-the-Air.
2. Check which software version you have
The software version number can be seen when the Landroid is power- on.
CONTROL
3. Manual updates
A. If your Landroid is not connected to your Wi-Fi network, you can still update it to the latest software version with a USB stick
B. Regularly visit the Worx Landroid website to check if any new version is available. If you subscribed to Landroid email list, you
will be notified when a new version is available
C. Download the latest software version at our website
D. Take a blank USB stick formatted in FAT32
E. Save the zip file and extract the content to your USB stick
F. Place Landroid on a secure and level surface
G.Turn off Landroid
H. Go to the rear of the Landroid to access the USB port.
I. Insert the USB stick in the port
J. Place the Landroid on the lawn again, inside the working area delimited by the boundary wire
K. Turn on Landroid
L. Without lifting Landroid, remove the USB stick when 'Please remove the USB key' is displayed
M.The update will begin automatically and may take a while. Landroid will restart automatically after the update is completed
NOTE: Make sure Landroid is within the boundary when restarting Landroid.
14
There is a new version
of your Landroid robot
mower software
INSTALL NOW
VOICE
EN