Automatic Connection - Samsung HW-K950 Mode D'emploi

aUtOMatiC COnneCtiOn

1. Connect a power supply to the subwoofer and surround sound speakers.
2. Connect a power supply to the Soundbar, and then press the
of the Soundbar.
3. The subwoofer and surround sound speakers are automatically connected to the Soundbar.
4. When auto pairing is complete, the blue indicators at the rear of the subwoofer and surround speakers turn on.
● If the red indicator at the rear of the subwoofer or surround speakers is on or the blue indicator flashes
continuously, auto pairing cannot occur. If this happens, connect each of the speakers manually,.
● you can enjoy better sound from the wireless subwoofer by selecting a Sound effect. (See page 10.)
● Important: Before you begin, put the batteries into the remote. See page 13 for instructions.
POWER
rear of Subwoofer
COnneCting tHe SUBWOOfer anD SUrrOUnD SPeaKerS
ManUaLLy if tHe aUtOMatiC COnneCtiOn faiLS
+ Before you Begin
● make sure that the Soundbar, the subwoofer, and the surround speakers are plugged in.
● make sure that the Soundbar is turned on.
1. Press and hold iD Set on the rear of the subwoofer and surround speakers for at least 5 seconds. The red
indicator at the rear of each speaker turns off and the blue indicator blinks.
POWER
POWER
POWER
POWER
LINK STANDBY ID SET
LINK STANDBY ID SET
rear of Subwoofer
LINK
LINK STANDBY ID SET
POWER
LINK STANDBY ID SET
LINK STANDBY ID SET
21
button on the remote control or on the right side
LINK STANDBY ID SET
rear of Surround Speaker
POWER
LINK STANDBY ID SET
LINK STANDBY ID SET
LINK
LINK STANDBY
rear of the Left and right Surround Speakers
CONNECTIONS
LINK
STANDBY ID SET
ID SET