Getting Started; Safety Information; Safety Warnings - Samsung HW-K950 Mode D'emploi

GETTING STARTED

GeTTInG STarTeD

SafeTy InformaTIon

Safety WarningS

To reDUCe THe rISK of eLeCTrIC SHoCK, Do noT remoVe THe CoVer (or BaCK).
no USer-SerVICeaBLe ParTS are InSIDe. refer SerVICInG To QUaLIfIeD SerVICe PerSonneL.
CaUtiOn
riSK Of eLeCtriC SHOCK.
DO nOt OPen.
Class II product : This symbol indicates that it does not require a safety connection to electrical
earth (ground).
aC voltage : This symbol indicates that the rated voltage marked with the symbol is aC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for
further safety related information.
Warning
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
CaUtiOn
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the
apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power
plug must be easily and readily accessible at all times.
CaUtiOn (for Canada)
This equipment complies with Industry Canada licence-exempt rSS standard(s). operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or
transmitter.
This device may automatically discontinue transmission if there is no information to transmit, or an operational failure.
note that this is not intended to prohibit the transmission of control or signaling information or the use of repetitive
codes where required by the technology.
this Class B digital apparatus complies with Canadian iCeS-003.
fCC radiation exposure Statement
This equipment complies with IC rSS-102 radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
2