Peaq PPA33BT-B Mode D'emploi page 31

LED Status
LED turns on continuously:
Battery charging.
LED twinkles: The capacity
of the battery is < 20 %. Bat-
tery must be re-charged.
LED turns off: Battery charg-
ing complete.
Note
During the battery charging
process the speaker can-
not be operated. It will take
approx. 3-5 hours to be fully
charged the battery.
_PPA33BT_150731_V05_HR.indb 31
Bluetooth
PAIRING
1. Press the
sound sounds and the LEDs
of the speaker light on. The
speaker is ready for pairing.
2. Activate the
function on
device. Connect
Bluetooth -AV-source with
®
the speaker via Bluetooth
pairing.
3. A short melody will indicate
that both
successfully paired.
ENGLISH
®
button until a
Bluetooth
®
the audio
the
®
devices are
31
31/7/15 2:20 PM