USRobotics 5637 Guide D'installation Rapide page 12

English
You should see U. S. Robotics V.92 USB Modem and a COM
port setting. If you do not see a description of your modem,
repeat the installation procedure.
D. On the Modems tab, select the description of your modem and
click Properties.
E. On the Diagnostics tab, click the Query Modem button.
If you see a series of commands and responses from the modem,
the installation was successful.
If you do not see a description of your modem, the installation
was not successful; repeat the installation procedure.
Windows XP
A. Click Windows Start > Control Panel.
B. Click Phone and Modem Options and then click the Modems
tab.
You should see U. S. Robotics V.92 USB Modem and a COM
port setting. If you do not see a description of your modem,
repeat the installation procedure.
C. Highlight the description of your new modem, and click Proper-
ties.
D. Click the Diagnostics tab and then click the Query Modem but-
ton.
If you see a series of commands and responses from the modem,
the installation was successful.
If you do not see a description of your modem, the installation
was not successful; repeat the installation procedure.
Windows 2000
A. Click Windows Start > Settings > Control Panel.
B. Double-click the Phone and Modem Options icon.
C. Click the Modems tab.
Make sure that U. S. Robotics V.92 USB Modem is selected. If
you do not see a description of your modem, repeat the installa-
tion procedure.
8