Description Of Symbols - GMC GMC1252G Traduction Des Instructions Originales

Introduction
Thank you for purchasing this GMC tool. This manual contains information necessary for safe and effective
operation of this product. This product has unique features and, even if you are familiar with similar products,
it is necessary to read this manual carefully to ensure you fully understand the instructions. Ensure all users of
the tool read and fully understand this manual.
Guarantee
To register your guarantee visit our web site at
www.gmctools.com and enter your details*.
Your details will be included on our mailing list (unless indicated otherwise) for information on future releases.
GB Details provided will not be made available to any third party.
Purchase Record
Date of Purchase:
Model: GMC1252G
Serial Number:
Retain your receipt as proof of purchase.
If registered within 30 days of purchase GMC guarantees to the purchaser of this product that if any part
proves to be defective due to faulty materials or workmanship within 24 MONTHS from the date of original
purchase, GMC will repair or, at its discretion, replace the faulty part free of charge. This guarantee does not
apply to commercial use nor does it extend to normal wear and tear or damage as a result of accident, abuse
or misuse.
* Register online within 30 days of purchase.
Terms & conditions apply.
This does not affect your statutory rights.
Original Instructions
(located on motor housing)

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Wear protective clothing
Read instruction manual
Toxic fumes or gases!
Caution!
Always disconnect from the power supply when adjusting, changing accessories, cleaning,
carrying out maintenance and when not in use!
Be aware of kickback!
Keep bystanders away!
DO NOT use for side grinding.
Beware of flying objects
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
6