Maintenance
WARNING: Always remove the plug from the mains power supply before carrying out any maintenance/
cleaning.
•
This tool is manufactured using class leading components and makes use of the latest in intelligent
circuitry that protects the tool and its components. In normal use it should provide a long working life
•
Inspect the supply cord of the tool, prior to each use, for damage or wear. Repairs should be carried out
by an authorised Triton service centre. This advice also applies to extension cords used with this tool
•
if the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
Cleaning
•
Keep your machine clean at all times. Dirt and dust will cause internal parts to wear quickly, and shorten
GB
the machine's service life. Clean the body of your machine with a soft brush or dry cloth. If available, use
clean, dry, compressed air to blow through the ventilation holes
Brushes
•
Over time the carbon brushes inside the motor may become worn
•
Excessively worn brushes may cause loss of power, intermittent failure, or visible sparking
•
To replace the brushes, remove the Easy Brush Access Covers (3) from both sides of the machine.
Remove the worn brushes and replace with new. Replace Easy Brush Access Covers
•
After replacing, check that the brushes can move freely in the brush holder and run the tool without load
for approximately 5 minutes before use
•
Alternatively, have the machine serviced at an authorised service centre
Note: Always replace carbon brushes in pairs.
Storage
•
Store this tool and its accessories after use in its case, in a dry, secure place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no longer functional and are
not viable for repair.
•
Do not dispose of power tools, or other waste electrical and electronic equipment (WEEE), with household
waste
•
Contact your local waste disposal authority for information on the correct way to dispose of power tools
12