Install Oven - Dacor DOC30P977D 240VAC Manuel D'installation

3-Wire Cable from Home Power Supply - U.S. Only
IMPORTANT: Use the 3-wire cable from home power supply where local codes
permit a 3-wire connection.
A
B
C
D
E
F
Cable from home power
A.
supply
Junction box
B.
C. Black wires (normally L1)
White wires (normally
D.
N-neutral)
E. green wires (normally
G-ground)
F. 4-wire flexible conduit from
oven
G. Red wires (normally L2)
H. UL listed wire connectors
I. UL listed or CSA approved
conduit connector
Install_DOC30P977D_DG68-01317A-00_EN+MES+CFR.indb 13
1. Connect the 2 black wires (C) together
using a UL listed wire connector.
2. Connect the 2 white wires (D) and
G
the green (or bare) ground wire (of
H
the oven cable) using a UL listed wire
connector.
Connect the 2 red wires (G) together
3.
using a UL listed wire connector.
I
4. Install junction box cover.

Install oven

1.
Carefully push against front oven frame.
Handle
2.
Only push the lower oven. Do not push the
upper oven. (To prevent radio frequency
leakage.)
Using 2 or more people, lift the oven
partially into the cabinet cutout. Use
the handle as shown below.
NOTE
Push against the seal area of the front
frame to push the oven into the cabinet
until the back surface of the front frame
touches the front wall of the cabinet.
CAUTION
English 13
2020-06-30 4:51:35