Storage; Installation; Installation Conditions - FPZ SCL 10DL-MD MOR Instructions

10.4 STORAGE


Store the machine in a dry place, if possible keeping it in its packaging.

Do not remove the protection from the openings.

11 INSTALLATION

11.1 INSTALLATION CONDITIONS


Make sure the conditions of use as described in section 3 are complied with, then proceed with installation of the machine as
specified below.
Danger due to limited visibility in the place where the unit is installed!
Make sure to always keep an eye on the installed unit when carrying out any operation in the installation area.
The control elements must be placed so that the installed unit can be seen.
Danger due to vibration!
Regularly check the fixing of the unit to the support structure.
Excessive vibration of the unit can seriously damage the machine.
Vibration dampers are available on request.
NOTE FOR THE USER
FPZ-MI-10DL-15DH-MD-MOR-EU-15-R01 29 / 102