audiophony CD-3530 Guide De L'utilisateur page 20

LCD
(25) ~(28)TRACK, MINUTE,
Displays
These displays indicate information for the CD's
current position and time.
(29) BAR Indicator
These ten indicators provide a visual display of the
approximate position of the pickup within the current
track.
(30) REMAIN Indicator
It indicates that the time shown on the display is the
Operations
1. Opening and Closing the Disc Holder
Turn the unit power on. Press the OPEN/CLOSE button to open the disc holder. OPEN/CLOSE buttons are
provided on both the main unit and control unit.
The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE
button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE button.
2. Loading discs
Hold the disc by the edges and place it in the disc holder, then press the
OPEN/CLOSE button again to close the disc holder. The unit will show the total track
number and the total playing time for about 2 seconds then enter the cue condition,
the cue point will be set to the music starting point of the first track automatically.
CAUTION:
Do not place any foreign objects in the disc holder, and do not place more than one disc in the disc holder at a time.
Do not push the disc holder in manually when the power is off, as this may result in malfunction and damages the
player.
3. Selecting Tracks
Press the SKIP button once to move to next higher or lower track.
Hold the SKIP button to change tracks continuously at a higher speed.
When a new track is selected during playback, playback begins as soon as the skip search operation is completed.
If the skip button is pressed while at the last track, the first track is selected. In the same way, if the skip
button is pressed while at the first track, the last track is selected.
4. Starting Playback
Press the PLAY/PAUSE button during the pause or cue condition to start playback, the PLAY indicator lights.
The point at which playback starts is automatically stored in the memory as the cue point. The pickup then returns
to the cue point when the CUE button is pressed. (Back Cue)
5. Stopping Playback
There are two ways to stop playback.
Press the PLAY/PAUSE button during playback to
pause at that point.
SECOND and FRAME
Manuel CD-3530 version english V1.1 Juillet 05 - page 6
remaining time of playing track.
(31) CONTINU Indicator
When the indicator lights, the function will cause the
unit to play continuously.
(32) PITCH DISPLAY
It shows the BPM change range, the BPM changes
within a range of +/-8,+/-12,+/-16%.
Press the CUE button during playback to return to the
cue point and enter pause condition.(Back Cue)
Figure 2-1