Brother Innov-is XP1 Guide D'installation page 5

c
Review the [Terms on certification of Upgrade KIT], and then
press [I agree] to accept.
d
Type in the 16-digit activation
code printed on the activation
card, and then press [Set].
e
After a message appears, indicating that the machine number
and activation code will be sent to the server, press [OK].
f
When certification of the kit is complete, a message appears,
indicating that certification was successful.
Turn off the machine, and then turn it on again.
g
Confirm that there is a check
mark beside the kit number in
the machine's Settings screen.
→ The kit has been certified, and the new features can be used.
The following manuals can be downloaded from
http://s.brother/kcpb
• Operation Manual
• Embroidery Design Guide
• Operation Manual Addendum
4