FALMEC Virgola Livret D'instructions page 22

- The rear telescopic elements allow adjusting depth, according to the wall unit dimension.
Even guard A can be adjusted according to the wall unit depth.
Fig. D
- In the exhaust version (define the rear or upper outet use), detect the optimal length of the
fume exhaust pipe (F) and carry out the connection. Set up the electric connection only once
the electric power supply has been cut off. For the filtering version, ensure that the upper
part of the wall unit has a specific hole for draining the air purified by the carbon filters.
- For hood models with additional chemneys, mount them according to the type of wall unit
used. See drawings of the hood with several wall unit options.
- Remount the metal filters and, if required, adjust the closing/opening force of the lower slide.
- Power the hood complying with the regulations in force (see sec. D of the booklet).
20