Remote Controller Setting - Mitsubishi Electric City Multi PLFY-P15VFM-E1 Manuel D'installation

tion location.
SW21-1 SW21-2
Silent – ON
Standard OFF OFF
High ceiling ON OFF
With i-See sensor panel, SW3-4 must be adjusted as a position of i-See sensor. (Refer to page 15.)
SW3-4
Position 1 OFF
Position 3 ON
SW3-5
Draft-less (default) OFF
Downward setting ON
Model
PLFY-P15VFM-E1
PLFY-P25VFM-E1
PLFY-P32VFM-E1
For PLFY-FM, only the particular outlet can be fixed to certain direction with
the procedures below. Once fixed, only the set outlet is fixed every time air
the remote controller.)
"Address No. of indoor unit" is the number given to each air conditioner.
"Outlet No." is the number given to each outlet of air conditioner.
(Refer to the right.)

Remote controller setting

Height
2.5 m
2.7 m : default setting
Power supply
Max.: 264V
Downward
Fixed setting
particular direction.
IFM: Indoor Fan Motor
MCA (A)
Electric component box
Outlet No. 4
Outlet No. 3
Note:
air outlet. Set the air direction while checking the information shown on the
-
Output: Fan motor rated output
IFM
Output (kW) FLA (A)
Outlet No. 1
Outlet No. 2
-