General Information; Introduction; Operating Principle - Bodet LoRa Notice D'installation Et D'utilisation

1. GENERAL INFORMATION

Thank you for choosing BODET's Lockdown Repeater. This product has been carefully designed for your satisfaction
according to ISO9001 quality control.
We recommend that you carefully read these instructions before you start to use the product.
Keep these instructions for the duration of the life of your product so that you can refer to them whenever necessary.
Failure to follow these instructions may cause irreversible damage and invalidate the warranty.
Non-contractual data. Bodet reserves the right to make certain functional, technical, design and colour changes to
its devices without prior notice.
This manual is subject to change without notice. To obtain the latest version of this documentation, see our website:
www.bodet-time.com.

1.1 Introduction

The Lockdown Repeater was designed with the purpose of improving the distance between the remote control units
and the LoRa Lockdown Receiver connected to the Sigma master clock to start Lockdown alerts.

1.2 Operating Principle

Power supply from the Sigma master clock
12V: From the GPS or 24V input From the impulse input
External inputs of the master clock
repeater LoRa
Remote control
LoRa
eco-system
harmonys
LOCKDOWN remote control system
(ref.: 907 552)
LoRa RECEIVER
Control of 1 to 4 external inputs of the Sigma master clock
Or
Eco-system
melodys
ANTENNa
Or
AUX
LOC
Eco-system
SIGMA SOUND
EN
9