GB
TROLLEY FOR VENTA AIRWASHER
For LW24, 24 Plus, 44, 44 Plus, Kuube (LW25), Kuubel (LW45)
Airwasher models.
SAFETY INSTRUCTIONS
• Please read the safety instructions before assembling the trolley. Ensure that the safety
instructions were also understood. Please retain these safety instructions / assembly instructions
for later use.
• The Venta trolley is a product solely intended for the transport of Airwashers (LW24, 24 Plus, 44,
44 Plus, Kuube (LW25), Kuubel (LW45) models). The trolley may only be used for the purpose
intended whilst exercising due care and attention. There is a risk of injury in the event of improper
use (e.g. when used as a climbing aid or to sit on).
• This product is not intended for the transportation of people. Children should be supervised in
order to ensure that they do not play with the product.
• Proceed carefully during assembly. Keep out the reach of children.
• Ensure that all moving parts are only operated cautiously in order to avoid crushing and other
injuries.
• This product is not suitable for high pile carpets.
• The manufacturer assumes no liability for any personal injury and/or damage to property caused
by improper or incorrect use.
SCOPE OF DELIVERY
1 × frame
2 × handle for Kuube (LW25)
2 × handle for Kuubel (LW45)
2 × handles for LW24/44 (also suitable for LW24 Plus/44 Plus)
1 × operating instructions
ASSEMBLY INSTRUCTIONS
Figure 1: Place the suitable handle (depending upon the appliance type) onto the frame and clip
into place. This ensures that the device is securely seated.
Figure 2: Use the frame as delivered when dealing with the LW24, 24 Plus, Kuube (LW25) models.
When dealing with the LW44, 44 Plus, Kuubel (LW45) device type, extend the frame until the limit
stop is reached.
Figure 3: Place the device onto the trolley. Please ensure that the Airwasher is correctly locked
into place (see circle).
5