Controlling Power On/Off Automatically (Timer Function); Adjusting The Time; Displaying The Time - Sony FWD-50PX1 Mode D'emploi

Adjusting Color Matrix / Controlling Power On/Off Automatically (Timer Function)
4
Select the signal format with M/m.
The following menu appears on the display panel.
C u s t o m S e t u p
C o l o r M a t r i x
4 8 0 p
1 0 8 0 i
7 2 0 p
, t o s e l e c t , p r e s s
t o r e t u r n
5
Select the color matrix with M/m.
Y/CB/CR : When signal format is 480p.
Y/PB/PR : When signal format is 1080i or 720p.
Refer to the operating instructions provided with each
device for details regarding the correct setting.
Controlling Power On/Off
Automatically (Timer
Function)
This display has three power controlling functions.
You can set one to turn off the power automatically
after a certain period if there is no input signal (Power
Saving function). You can set the time when the
power automatically turns on/off (On/Off Timer
function).

Adjusting the time

1
Press MENU.
The main menu appears on the display panel.
P i c t u r e / S o u n d
P i c t u r e M o d e
A d j u s t P i c t u r e
A d j u s t S o u n d
, t o s e l e c t ,
e n t e r a d j .
2
In the Timer/Clock menu, press M/m to move the
cursor (yellow) to "Clock Set" and press ENTER.
The following menu is displayed, and background
color of the time changes to yellow.
42
(GB)
: Y / C B / C R Y / C B / C R
: Y / P B / P R Y / C B / C R
: Y / P B / P R
ENTER
C o n t r o l
: S t a n d a r d
, t o
ENTER
m e n u
T i m e r / C l o c k
C l o c k S e t
3
Adjust the hour with M/m and press ENTER.
The setting for the hour is entered and the
background of the minute is displayed in yellow.
4
Similarly, adjust the minute and press ENTER.
The setting for the minute is entered and the
seconds background changes to yellow.
5
Press ENTER.
The second is reset to 00.
6
Press MENU.
The display returns to the normal screen. If you
must make further adjustments, or the setting must
be made again, repeat the process from step 1.
Note
If the time displayed is significantly slow, the internal
battery may be losing its charge. Please contact the
your authorized Sony dealer to have the battery
replaced.

Displaying the time

1
In the Timer/Clock menu, press M/m to move the
cursor (yellow) to "Clock Display" and press
ENTER.
The following menu appears on the display panel.
T i m e r / C l o c k
C l o c k S e t
C l o c k D i s p l a y
O n / O f f T i m e r
A u t o S h u t o f f
, t o s e l e c t ,
t o r e t u r n
2
Select On with M/m and press ENTER.
When the menu disappears from the screen, the
clock shows and stays on the screen for about 5
seconds.
0 1 : 2 4 : 1 1
:
O f f
:
O n
: O f f
p r e s s
ENTER