INSTALLATION MANUAL ADVANCE PLUS
ENGLISH
CONNECTING THE FLUE
Warning:
Incorrectly connecting the flue is a fire hazard.
Gas appliances can be installed in different ways depending on the installation
requirements.
Gas oven beneath an extractor hood
Gas oven beneath an ceiling fan
This type of installation always uses an anti-backflow valve
(special accessory). These can be ordered by giving the following
references:
This type of installation requires a stretch of rising air.
Install the oven according to the kitchen layout. The gas supply to
the oven must only be switched on when the extraction system is
activated.
Gas oven directly connected to a chimney
Convection ovens, or combined ovens with an anti-backflow valve (special accessory),
may be directly connected to a chimney.
indicating the following references:
Oven Model 061/101:
Oven Model 102:
Oven Model 201:
Oven Model 202:
The gas oven should only be enabled when the extraction
system is activated.
Flue gas reaches very high temperatures.
Warning: Flues must be hermetically sealed. use materials that
are thermally stable at temperatures of up to 400º.
User instructions:
The flue gas may have high temperatures, so that the exhaust gas and hot metal parts
can cause burns.
Do not place combustible materials on the apparatus
Installing
a
gas
oven
recommended.
Install the oven according to the kitchen layout. The gas supply
to the oven must only be switched on when the extraction
system is activated.
The accessory can be ordered diverter
28
beneath
an
extractor
19012272
19012273
19012290
19012291
;
fire hazard.
hood
is