INSTALLATION MANUAL ADVANCE PLUS
ENGLISH
GENERAL SAFETY INSTRUCTIONS
GENERAL INFORMATION
If the appliance is not used for long periods of time, the water and electricity
supplies should be disconnected.
WARNING
The installation, incorrect adjustment, inappropriate maintenance or use of the
appliance may cause material damages and injuries. Before commissioning the
appliance, carefully read the instructions contained in this manual.
Do not store or use gases or explosive liquids near the appliance, or introduce
liquids containing alcohol inside the machine.
When the oven is hot, do not open the door suddenly (danger of burns due to
hot steam). Do not put cold water in the chamber when it is hot.
Repairs or adjustments carried out by personnel not belonging to FAGOR
INDUSTRIAL SAT (Technical Assistance Service) or an authorised SAT will
imply the cancellation of the oven warranty.
The installer of the oven must complete the CHECK LIST, after checking the
following:
• Electrical connection
• Pneumatic connection
• Hydraulic connection
• Waste water connection
• Conditions of installation
• Conditions of installations
Explication to user of the general working of the oven (use and maintenance)
This appliance must be installed in an adequately ventilated to prevent the
formation of unacceptable concentrations of substances harmful to health.
GENERAL INFORMATION
Before switching on the newly installed appliance for the first time, the inside
should be cleaned with a cloth soaked in soapy water. Then switch on the
empty oven in Steam mode for ½ hour to eliminate the odours associated with a
new appliance.
Before switching on the appliance, check that the water mains tap is open.
If the oven is not going to be used for a long period of time, the mains water tap
should be closed.
Open the oven door carefully to avoid burns from the steam..
22