Hardware Installation - IOGear UpStream GUV302P Guide De Démarrage Rapide

Hardware Installation

1. Connect the USB-C UVC Output Port to the host (e.g. laptop
or Android Phone) using a USB-C Cable (included). Or, if
your laptop only has a USB-A interface, connect the USB-C
to USB- A Cable (included) to the host.
2. Connect HDMI Source (480p/720p/1080p/4K@60hz) device
to the HDMI input port.
3. (Optional) Connect the HDMI Loop out Port to a spare
HDMI-Enabled display using an HDMI cable (not included) to
display your HDMI content.
1
Or
6
5
Or
2
4
3