Hardware Installation - IOGear Dock Pro 100 GUD3C02B Guide De Démarrage Rapide

Hardware Installation

Please follow steps below to ensure the optimal performance:
STEP 1. Turn on the host computer. Then plug in the laptop's USB-C Power adapter to
the USB-C port with Power Delivery Pass-Through*
STEP 2. Connect external devices to appropriate ports as needed (refer to product
overview for ports call out).
STEP 3. Connect external monitor(s) to the video output with choices in: DisplayPort
and HDMI for dual monitors or via VGA port for a single monitor. Please note: VGA port
cannot be used with HDMI or DisplayPort at the same time.
STEP 4. Connect the tethered USB-C cable on GUD3C02B to the USB-C port on the
host computer. The computer screen might appear to flicker few times before
GUD3C02B can recognize all the connected devices.
*Note: Without plugging the laptop's USB-C power adapter, GUD3C02B can still
function in step 2-3, but GUD3C02B will not provide power to charge the laptop.
**Maximum resolution of 4K is dependent on the capability of the video display and its
computer host sources.
MONITOR CONFIGURATION
Single Monitor
Up to 3840 x 2160@30 Hz
Windows 10 / Chrome OS /
USB-C
Thunderbolt 3
Windows 10 / Mac OS X
Dual Monitor
A
Laptop
Up to 1080P@60 Hz
USB-C
Thunderbolt 3
B
A
Laptop
HDMI
Mac OS X
B C
HDMI DisplayPort
Windows 10
Windows 10
B
A
Laptop
DP
Up to 3840 x 2160@30 Hz
Windows 10 / Chrome OS /
Mac OS X
Windows 10 / Mac OS X
B B
A
Laptop HDMI DisplayPort
Up to 1080P@60 Hz
Windows 10
Windows 10 / Mac OS X
2
B
A
Laptop
VGA
Up to 1080P@60 Hz
Windows 10 / Chrome OS /
Mac OS X
Windows 10 / Mac OS X
Not Avaliable
Chrome OS / Mac OS X