Hardware Installation - IOGear GUC3025HW6 Mode D'emploi

Hardware Installation

1. Connect the Micro-B end of the included
USB 3.0 cable to the Micro-B port on the
USB External HD Video Adapter. Then
connect the USB Type-A end of the cable
to any available 3.0 USB port on the
computer. Once plugged in, the Installing
Device Driver Message will come out and
the Windows User Account Control window
opens.
2. The device will be installed automatically.
USB 3.0 Cable
1
(included)
Secondary
Primary
Monitor
Monitor
7
4
HDMI Cable
(not included)