Maco PROTECT OPEN-DOOR Mode D'emploi page 6

Function
Set-up mode
Normal mode
Reset
Procedure
Change master code
★ Active master code ★
New master code ★
New master code = operating code
Once the master code has been changed
successfully, the red and green LEDs will flash
twice simultaneously. If timed-out the red LED will
flash for 3 seconds
Open Door.
Master code = enter operating code
If the master code entered is correct the green LED
will turn on and the relay will be activated.
An invalid master code will activate a red LED light.
Delete all and reset to initial default settings
★ active master code = operating code ★ 0 ★
active master code = operating code ★
= default settings: all LEDs are steadily switched on
and the master code is reset to the original factory
master code
The parts in this package
must not be exchanged with
third-party pack parts!
- 6 -