Maco PROTECT OPEN-DOOR Mode D'emploi page 5

User´s manual
Access Control Systems
MACO openDoor Code
Technical Specifications:
External Unit Dimensions (WxH):
Operating Voltage:
Power Consumption:
Operating Temperature:
Storage Capacity:
Functions overview /
Symbols and meaning
★ = Entry confirmation
= Open Door
Important information:
1. Default factory settings:
all LEDs flashing steadily - unit switched on.
2. Due to security reasons, certain master code combinations will not
be permitted. Recurrent number combinations like 8888, 123456 or
4321 will not be accepted by the system.
3. Master code: 4~6 digits allowed.
(master code = operating code)
4. Locked mode: If an incorrect master code is entered for five times,
the device will switch to locked mode and will prevent any
unauthorized person from access. The red blinking LED indicates
that the device is in locked mode. The locked mode will initially have
a limited duration. After five more incorrect entries the locked down
time will be extended (blocking intervals: 1 minute, 5 minutes, 30
minutes, 1 hour, permanent block).
5. Unlock: master code
✓
AC alternating current ∼ ≈
45 mm x 76 mm
12 ~ 24V DC
max. 150 mA
-20 ~ +85 °C
1 operating code
master code
- 5 -
Scan for more Info
12 - 24V DC 1,5 A
DC direct current