Klarstein Thermaxx Retroheat Mode D'emploi page 15

• In case of a breakdown or malfunctioning of the appliance, disconnect it at once.
• Do not attempt to repair it, but take it to a service centre approved by the
manufacturer.
• If you decide you do not want to use this appliance any longer, disable it by cutting
the power cable - of course, after disconnecting it from the socket.
• The power cable should be extended to its full length to avoid over heating.
• For safety reasons, the appliance should never be opened.
• The appliance has been designed and manufactured to operate in the home. Any
other use is considered inappropriate and dangerous.
• Do not insert objects through the safety grill or the air inlets.
• During use, rest the appliance on a flat surface.
• Do not use this heating appliance with programmers, timers, separate remote
systems (different to the ones provided with the appliance) or any other device
that automatically turns on the appliance, as there is a risk of fire in the event
the appliance is covered or positioned incorrectly. Do not nuse the heater in the
presence of flammable substances (petrol, paints, etc.).
• Do not place the cord near sources of heat.
EN
15