Assembly Of The Support Rolls - Klarstein Thermaxx Retroheat Mode D'emploi

EN

ASSEMBLY OF THE SUPPORT ROLLS

Insert the wheels into holes "C" and "D" in the metal supports and fasten them with the
nuts.
Turn the apparatus upside down, unscrew the wing nuts from the bracket (fig. 1) and
insert the bracket between the first and second element (fig. 2). Insert the end of the
bracket into holes "A" and "B" in the metal support (fig. 3) and fasten it by using wing
nuts (fig. 4).
Mount the other bracket as described above, positioning it between the last and
second-last element of the radiator.
1 2 3 4
Before connecting or disconnecting the appliance, make sure that the power selector (4)
is in the OFF position ("0").
17