Accessories; Final Assembly - KOBE CH7630SQB Instructions D'installation Et Manuel D'utilisation

Accessories

9. Drop oil tunnel into recess support near rear
of hood. Refer to Figure 6.
10. Install baffle filters and stainless spacer(s).
Refer to Measurements and Diagrams on
page 22 for baffle filter and stainless spacer
placement. Angle baffle filter toward back of
hood c. Push baffle filter up until almost
level d. Slide forward into recess behind
the front of hood e. Lower baffle filter f.
Slide back until it fits into resting position g.
Refer to Figure 7.
11. Repeat step 10 to install all baffle filters and
stainless spacer(s).
Final Assembl y
12. Turn power ON in control panel. Check all
light and fan operation.
13. Make sure to leave this manual for the
homeowner.
Figure 7
8