Factory Settings; Demonstration Mode - Wolf SPO30TE/S/TH Guide D'utilisation Et D'entretien

O VEN O P E RAT I ON
Settings
C OO K T I M E CO M P L E T I O N R E MI N D E R
Upon completion, the oven chimes every ten seconds for
the first minute; then every three minutes (for one hour) until
Stop/Clear is touched.
To Eliminate the Reminder:
Touch Settings twice.
1
Touch 6.
2
Touch Start. "REMIND SIGNAL OFF" appears on the
3
control panel display.
To Restore the Reminder:
Touch Settings twice.
1
Touch 1.
2
Touch Start. "REMIND SIGNAL ON" appears on the
3
control panel display.
WE IG HT U NI T
For cooking modes where weight is required, the default
unit of measure can be changed from pounds to kilograms.
To Change the Unit of Measure to Kilograms:
Touch Settings three times.
1
Touch 6.
2
Touch Start. "KGS SET" appears on the control panel
3
display.
To Change the Unit of Measure to Pounds:
Touch Settings three times.
1
Touch 1.
2
Touch Start. "LBS SET" appears on the control panel
3
display.
FAC TORY SETTI N GS
To Restore Factory Settings:
Touch Settings four times.
1
Touch Start. "FACTORY SETTINGS RESTORED"
2
appears on the control panel display.
D EM O N STR ATIO N M O D E
Demonstration mode allows operation to be demonstrated
without power to the speed oven.
To Enter Demonstration Mode:
Touch Settings five times.
1
Touch 1.
2
Touch Start. "DEMO ON" appears on the control panel
3
display. "DEMO" remains on the display.
To Exit Demonstration Mode:
Touch Settings five times.
1
Touch 6.
2
Touch Start. "DEMO OFF" appears on the control panel
3
display.
wolfappliance.com | 11