2 - INSTRUCTIONS TO THE INSTALLER
•
to fix the soffione to equipment
The
relative
connection/scollegamento of the water attack and
that relative to the substitution of the soffione
shower and of the tap lavapiedi they demand that
the fixed connections to the body shower are
necessarily held firm through one English key
waves to avoid to go to loosen the estate between
body shower and same connection.
Assembly valve of containment (Mod. M -S-N-E)
The safety valve and containment, only supplied with i
models M-S-N-E, it must be installed to the income of
the cold water with the arrow turned towards the
apparatus (1), without some interception between val ve
and shower (2).
The levetta black
(3) present on the safety valve
serves for the emptying of the shower.
Fig. 2.5-1
Fig. 2.5-3
Parameters water
The apparatus will last more over a long time span if
they will be respects to you, like previewed from D. Lgs.
02/02/2001, n. 31 (performance of the relative directive
98/83/CE to the quality of destined waters to the human
consumption), the following parameters:
hardness total: comprised between the 15 and 50
°F (in particular for waters subordinates to treatment
of sweetening or dissalazione)
chlorides: 25 mg/l (the maximum value 200 mg/l)
pH: comprised between 6,5 and 9,5
conductivity: 400 µS/cm (the maximum value 2500
µS/cm)
In water presence with not consistent parameters to
brought back how much over, the guarantee will decay
automatically.
[[Il]] model M, in particular, it is equipped of anode to
magnesium for the protection against galvanic currents
and every 8-12 months its substitution is obligatory.
operations
to
Fig. 2.5-1
Fig. 2.5-2
the
In order to replace to make it the following operations:
to remove the black cover (28) situated in the
advanced part
to unscrew the stopper (17)
to remove the lock nut (27) and the rosette (5)
to unscrew the old anode (9) and to replace it with
that new one
to riposizionare rosette (5) and lock nut (27)
to riavvitare the stopper (17)
to riposizionare the black cover (28)
17
Fig. 2.5-4