Solarjet SOL-M Manuel D'utilisation page 13

1 - GENERAL INFORMATION AND CHARACTERISTICS
Mod. C
I mod. M-S-N is composed gives:

transparent tube in meth-acrylate (particular
product that it exalts the effect greenhouse with
a coefficient of advanced transparency to the
crystal)

tank of I accumulate, of cylindrical shape,
painted externally with selective opaque black
varnish, it is in vetroporcellanato steel for M
and in stainless steel AISI 316L for the versions
S and N; the particular shape and structure
confer an optimal resistance to the pressure

base, in galvanized steel sp. 4 milimeter for the
version M and in stainless steel AISI 304 for the
versions S and N, that it offers the possibility to
fix all in simple way to the base in wood
(optional) or to a flat pavement through 4 lives

rubinetteria and connections in chromium plated
brass
[[Il]] mod. And it is composed give:

tank of I accumulate, of cylindrical shape, in
stainless steel AISI 316L opportunely satinato,
avoiding therefore the glare of the solar beams;
the particular shape and structure confer an
optimal resistance to the pressure

base, in stainless steel AISI 304, that it offers
the possibility to fix all in simple way to the
base in wood (optional) or to a flat pavement
through 4 lives

rubinetteria and connections in chromium plated
brass
I mod. P3-P2 they are composed give:

tank of I accumulate, of cylindrical shape, in
non-toxic polypropylene adapted for alimentary
uses and stabilized UV

base, in stainless steel AISI 304, that it offers
the possibility to fix all in simple way to the
base in wood (optional) or to a flat pavement
through 4 lives

rubinetteria and connections in branch and
brass

the tank does not demand the installation of
safety valve in how much is not in pressure.
[[Il]] mod. C is composed gives:




The semplicità of use and the absence of maintenance
are the main characteristics of the solar showers. Their
cylindrical shapes and the direct exchange (without fluid
carriers) of it increase to the rendering and the warm
water production; moreover, the reduced dimensions of
I block reduce the effect sail caused from the wind.
It does not need of several pumps, telephones
exchange and equipment.
1.5 EMERGENCY MEMBERS
Safety valve and containment
I models M-S-N-E they are equips you of safety valve
(1) and supplied with the solar shower. This has the
function
overpressures
of the water when this
prevents
circuit of the cold water.
Fig. 1.4-7
IMPORTANTAnd : lto safety valve it is not to
containment total but servants to only avoid the
miscelazione between warm and cold water. If the
tipologia of the hydraulic system demands it valve
to containment is necessary to install one total.
The eventual absence of the same one ago to decay
the guarantee on the tank.
IMPORTANTAnd : Such valve is not present on the
models P3-P2-C in how much not necessariver.
Reducer of portata
I models P3-P2- C they preview the insertion of a
reducer of portata. This is screwed in the muff for the
connection of the water conduct.
IMPORTANTAnd : it is fundamental that this reducer
of portata, waves to avoid permanent damages to
the shower, never do not come removed. In the
event in which, for any reason (pulizia, etc) had to
be unscrewed,
riposizionarlo in its center before reconnecting the
water attack.
13
tank of I accumulate, of cylindrical shape, in
stainless steel AISI 316L opportunely satinato,
avoiding therefore the glare of the solar beams;
the particular shape and structure confer an
optimal resistance to the pressure
base, in stainless steel AISI 304, that it offers
the possibility to fix all in simple way to the
base in wood (optional) or to a flat pavement
through 4 lives
rubinetteria and connections in branch and
brass
the tank does not demand the installation of
safety valve in how much is not in pressure.
of preservare the
had to the increase
it is heated;
to the same one of
to remember
tank from eventual
of the volume
moreover it
to r eturn towards
Fig. 1.5-1
Fig. 1.5-2
themselves of