Dab Operation - Grundig WMS 3000 BT DAB+ Mode D'emploi

TUNER MODE
Selecting the tuner input source
1
Select the TUNER input source by pressing
»SOURCE« on the remote control.
– The most recently selected station is played
(Last Station Memory).
Selecting presets
1 Select a preset by pressing »
the remote control to switch to the FM mode.
Displaying RDS station informa-
tion
If the device receives an RDS station, the station
name appears in the display together with »RDS«.
If no information is available, the reception frequen-
cy appears in the display.
Additional information can be displayed.
1 To display information on the current RDS sta-
tion, press »INFO« repeatedly.
– The following displays appear in sequence:
The name of the radio station.
The current programme type (PTY), e.g.
»Pop music«. »[No PTY]« appears if infor-
mation is not available.
The time.
The radio text.
The frequency.

DAB Operation

Digital Audio Broadcasting (DAB) is a way of
broadcasting radio digitally through a network
of transmitter. It provides you with more choice,
better sound quality and more information.
1 SOURCE
Press » « or »
lect the DAB source.
2 In DAB mode,press »
ton to access DAB menu, press »
menu operation.
12
ENGLISH
------------------------------------------------------------------------------------------------------------------------
« or » « on
« repeatedly to se-
REPEAT/MENU « but-
« to confirm
3 Then press » TUN - 10-
scroll the menu options.
– Full scan: Scan and store all the available
DAB radio stations.
– Manual: Tune to a DAB station manually.
– DRC: Dyamic Range Control (DRC) removes
or adds the degree of adaptation, required
for the differences in dynamic range be-
tween stations.
– Prune: Remove all the invalid stations from
the station list.
– System: Adjust system settings.
4
To select an option,press »
5 To tune to a station from the available station
list, press » TUN - 10-
repeatedly to navigate through the available
stations in DAB mode.
6 Press repeatedly »
DAB information in DAB mode.
7 Save a station as a preset by long pressing
» MEMORY/PROG
with » TUN +/TUN-
to save.
ECO Mode
The hi-fi system switches to standby in the ECO
mode after 15 minutes. This lowers the power
consumption to below 0.5 W.
1
In ECO mode, press »CLOCK« once.
– The clock is displayed. The device switches
back to ECO mode after 15 minutes.
2
In ECO mode, press and hold down »
two seconds.
– The device switches to standby, the clock is
displayed.
– The device switches back to ECO mode after
15 minutes.
« or » TUN+ 10+
« to confirm.
« or » TUN+ 10+
INFO « to show different
«. Selecting the preset
« and then press »
« to
«
«
« for