Trimming wet hair
• Do not use the attachment when trimming wet hair.
1
Wet and apply soap to your body.
2
Press the power switch to turn on the power
and trim.
• Without the attachment (See page 14.)
3
Apply less pressure than you
would when trimming dry hair,
and move the main body in a
gliding motion.
4
Turn off the switch after use.
PB019648 - ER-GK80
_(01GB)_12-04-20.indd 13
Removing and mounting the attachments
• Take care not to injure hands, etc., with the blade
when removing or mounting the attachment.
►
Removing the attachment
Hold the main body
securely and pull the
attachment out upward
and remove it from the
main body.
• Hold the rib (
) part
a
securely and remove
the skinguard
attachment.
►
Mounting the attachment
Mount the attachment to
the main body until it
clicks.
• If the attachment is not
attached correctly, it
may shift and end up
cutting too much during
use.
a
Click
13
2020/12/4 9:40:09