Symbols - Snapper XD SXDCS82 Guide D'utilisation

SyMBOLS

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLES DESiGnaTiOn
V Volts
A Amperes
Hz Hertz
W Watts
hrs Hours
n o
No Load Speed
/ min Per minute
Lithium-ion Battery
Recyling
Safety Alert Symbol
Read the instruction
Manual
Eye Protection
Wear Ear Protection Wear ear protection when operating this equipment.
Gloves
Kickback
Operate With Two
Hands
One Handed
Bar Nose Contact
Keep Bystanders
Away
Class II Construction
Wet Conditions Alert
EXPLanaTiOn
Voltage.
Current.
frequency(cycles per second)
Power
Time.
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Designates that this tool is in compliance with
Lithium-ion battery recylcing program requirements
Precautions that involve your safety
To reduce the risk of injury, user must read and understand
the instruction manual before using this product
Wear eye protection when operating this equipment.
Wear non-slip, heavy-duty protective gloves when handling
the chainsaw and the blade
DANGER! Beware of kickback
Hold and operate the saw properly with both hands
Do not operate the saw using only one hand
Avoid bar nose contact
Keep all bystanders at least 50'(15m) away
Double-insulated construction
Do not expose to rain or use in damp locations
9