Snapper XD SXDCS82 Guide D'utilisation page 18

OPERATION
PREPaRinG FOR CUTTinG
PROPER GRiP On hanDLES
See General Safety Rules for appropriate safety equipment.
• Wear non-slip gloves for maximum grip and protection.
• Hold the saw firmly with both hands. Always keep your left hand on the front handle and
your right hand on the rear handle so that your body is to the left of the chain line.
• Maintain a proper grip on the saw whenever the motor is running. The fingers should
encircle the handle and the thumb should be wrapped under the handlebar. This grip is
least likely to be broken by a kickback or other sudden reaction of the saw. Any grip in
which the thumb and fingers are on the same side of the handle is dangerous because a
slight kick of the saw can cause loss of control.
wa Rnin
DO NOT operate the
switch trigger with you r
left hand and hold the
front handle with your
right hand. Never allo w
any part of your body
to be in the chain lin e
while operating a saw .
Proper hand grip position
G
Chain line
18
Proper grip
Improper grip