Technical Specification - Beta 588 Mode D'emploi

INSTRUCTIONS FOR USE

TECHNICAL SPECIFICATION :-

Display:
Display update rate:
Zero suppression:
Auto reset hold time:
Operating temperature range:
Storage temperature range:
Maximum operating humidity:
AC power adapter:
Power consumption:
Weight:
Dimensions (in mm):
Case materials / finish:
Environment:
Electromagnetic Compatibility (EMC) Directive:
Low voltage directive:
Due to continuous improvement all specifications are subject to change without prior notice.
CALIBRATION :-
Your instrument has been supplied with a certificate of calibration. To maintain the specified
accuracy it is recommended that the instrument is recalibrated at least once per year. Recalibration
should be carried out by the Supplier or by the Supplier approved agent, where all the
facilities to ensure the instrument is functioning at maximum accuracy are available.
Do not remove front panel or case as there are no calibration settings inside.
REPAIR :-
Repair should be carried out by the Supplier or by the Supplier approved agent, where all the
facilities to ensure the instrument is functioning at maximum accuracy are available.
There are no parts for user repair inside the case.
CLEANING:-
Do not use abrasives or solvent based cleaners.
WARNING:-
If the instrument is used in a manner not specified by the Manufacturer, the protection provided by
the equipment may be impaired.
4
4 digit, 7 segment LED.
2 readings per second (2Hz).
± 2 least significant digits
2 seconds.
+5°C to +40°C.
-20°C to +70°C.
85% Relative humidity @30°C.
230 Volts AC at 50 Hz input (UK / Europe).
240 Volts AC at 50 Hz input (Australia).
120 Volts AC at 60 Hz input (USA / Canada).
90 to 264 Volts AC at 50-60 Hz input. (World).
6V, 300 mA DC output (centre positive)
1.8 W - maximum.
2 kg shipping weight.
175 (L) x 63.5 (W) x 63.5(H)
Powder coated aluminium housing. Stainless steel tran-
sducer shaft..
Indoor use within a light industrial environment.
In conformance with EN 61326-1 : 2006.
In conformance with EN 61010-1 : 2001.
To environmental conditions Pollution Degree 2
& Installation Category (Over voltage Category) II.
EN